Log in
EN
Start trial
How it worksRemote accessBenefitsMonitorAI integrationTimelineChartsProjectSupported loggersNewsPricingFAQLog in

Supported loggers › Busch-Jaeger APP-Control Server

APP-Control Server

The Busch-Jaeger APP-Control Server has a built-in KNX bus connection, so it works as the KNXSENSE logger without a separate KNX/IP gateway.

The previous generation was known as Busch-ControlTouch.

Busch-Jaeger APP-Control Server as the KNXSENSE logger
How it works

How the logger works.

The KNXSENSE logger is installed on the device as separate software. It has no effect on anything else the device does. Logic, visualisation, interfaces and scripts keep running as normal.

The logger only reads bus traffic and never writes to the bus. The connection is established outbound from the site, so no open ports and no static IP address are needed. The logger also works behind a shared carrier IP address.

Logging requires the APP-Control Server to be powered on continuously and the site to have an internet connection.

Specifications
Manufacturer
Busch-Jaeger
Remote ETS access
Via KNXSENSE
Manufacturer’s product page
busch-jaeger.de →

KNXSENSE-compatible models

  • CT/S2.1
  • CT/S2.11
  • 6136/APP-500
  • 6136/APP
1.0  main lineroutednot routed1.1.01.2.01.3.0loggerLine 1.1Line 1.2Line 1.3KNXSENSE400-day recording400 days agotoday
Logging coverage

How telegrams reach the recording.

The APP-Control Server is connected directly to the KNX bus, so it sees the telegram traffic on its own line and everything the line couplers route onto that line from the other lines.

KNXSENSE compares the addresses it sees against your ETS project and tells you straight away which lines and devices are in the recording and which are missing.

KNX telegram logging

KNX bus monitoring in your browser.

Jokainen sanoma, jonka APP-Control Server näkee väylällä, tallentuu ympäri vuorokauden millisekunnin tarkkuudella tietoturvallisille palvelimillemme , myös silloin, kun et ole paikalla.

Telegram-level history reaches 400 days back on a rolling window. You can browse it in your browser, on any device, without the ETS software.

TimeSource addressSource nameDestination addressDestination nameValue
09:14:02.1811.1.29ABB FCC/S 1.5.1.11/3/2Fan coil unit: cooling output18%
09:14:02.4573.1.12ABB SA/S 8.16.5.2 Switch Actuator0/1/31Plant room: lighting CONTROLoff
09:14:03.1461.1.19ABB DALI-Gateway DG/S 8.10/2/5Living room: general lighting VALUE72%
09:14:03.4221.1.21MDT Heating Actuator AKH-0800.031/2/26Living room: valve position34%
09:14:03.8332.1.34ABB SA/S 8.16.5.2 Switch Actuator0/4/3Guest house: terrace lighting CONTROLoff
09:14:04.2441.2.36MDT Switch Actuator AKK-1216.030/3/7Outdoor lighting: garden CONTROLon
09:14:04.5201.1.7MDT Shutter Actuator JAL-0810.023/1/12Bedroom: venetian blind POSITION100%
09:14:05.6301.2.33Hager TXA610B0/4/8Carport: lighting CONTROLon
09:14:06.3191.1.8Elsner Intra-Sewi KNX TH-L1/4/3Relative humidity: Bathroom58%
09:14:06.3931.1.48MDT Glass Push Button II0/6/2Scene: evening lighting2
09:14:07.0821.1.42MDT Switch Actuator AKK-1216.030/1/6Hallway: ceiling lighting CONTROLon
09:14:07.1561.1.35Siemens N 512/21 Switching Actuator0/1/22Utility room CONTROLoff
Remote KNX access

ETS tunnelling through KNXSENSE.

You open the connection from the interface, and from there you program the site in ETS as if you were on site.

Logging reserves one ETS tunnel slot and holds on to it. The remaining slots stay free for ETS, so remote access works alongside logging.

Remote access is included in the KNXSENSE monthly fee. No separate portal, licence or port forwarding is needed.

Setup

Setting up the APP-Control Server as a KNX logger.

KNXSENSE’s setup assistant walks you through the right settings step by step.

The whole setup takes only a few minutes.

  1. Import your ETS projectNames and structure from the project into KNXSENSE
  2. Install the loggerGuided install on the device
  3. Logging is runningThe first telegram from the site’s bus confirms the connection

Setup is a one-off job. When updates to the logger are released, they are installed on the device automatically. Updating requires no action from you and no visit to the site.